What Size Tractor For 3 Bottom Plow

GEPM64

Fellow member

Equipment

B2601 with FEL, Box Scraper, rotary mower, 3pt snowblower and Sovema Tiller

• #1

Hi folks,

What are the chances I tin can pull a 2 bottom plow with my B2601? Is at that place a rule of thumb for tractor size vs. implements size particularly with footing engagement implements?

Thanks in advance,

Glenn

85Hokie

Well-known fellow member

Equipment

BX-25D ,PTB. Under Armor, 'xc&'92-B7100HST's, '06 BX1850 FEL

• #2

Hi folks,

What are the chances I tin can pull a 2 lesser plow with my B2601? Is there a rule of pollex for tractor size vs. implements size particularly with ground engagement implements?

Thanks in advance,

Glenn

somewhere I read .......one" - one.5" per HP ......then a xiv" single would need 14 to 21 HP at the drawbar

only it volition depend on the soil and type of conditions too!

skeets

Well-known member

Equipment

BX 2360 /B2601

• #5

I use a 2 lesser plow on my l3200,it works but needs to be in 4wd

SDT

Well-known member

Equipment

multiple and various

• #6

Hi folks,

What are the chances I tin can pull a ii bottom plow with my B2601? Is there a rule of thumb for tractor size vs. implements size especially with ground appointment implements?

Thanks in advance,

Glenn

No.

Pulling a 2X14 moldboard turn will require close to 30 PTO HP and over xx drawbar HP in skillful basis and much more of both in many grounds. The tractor will too need to be properly ready for plowing, e.m., AG tires, ballast, etc.

Not sure what you program to do but a rototiller may well be a better alternative.

SDT

GEPM64

Member

Equipment

B2601 with FEL, Box Scraper, rotary mower, 3pt snowblower and Sovema Tiller

• #7

Cheers everybody,

I came beyond a used one for sale for $350 and thought it was a good deal. I may pick it up anyways.

Thanks,
Glenn

D2Cat

Well-known member

Equipment

L305DT, B7100HST, TG1860, TG1860D, L4240

• #8

If y'all desire a nice one bottom xvi" plow, notice a scrapper who has the quondam pull type plough(normally ii lesser). Remove one beam and brand the 3pt arms.

Non much to a turn.

• 

  97.9 KB Views: 422

GEPM64

Member

Equipment

B2601 with FEL, Box Scraper, rotary mower, 3pt snowblower and Sovema Tiller

• #10

Exist careful about buying old plows. Moldboards and shears practice wear out and you'll well-nigh likely never detect replacements. If you lot do find an old turn that's in fair condition, make certain you lot hardface the wearable parts to make information technology last equally long as possible.

I did not call up of that. Thank you for the info. I don't really need it, I simply found it and thought information technology was cheap plenty to add to the armada.

Regards,
Glenn

What Size Tractor For 3 Bottom Plow,

Source: https://www.orangetractortalks.com/forums/threads/2-bottom-plow-vs-tractor-size.36828/

Posted by: doolittleleyer1957.blogspot.com

Share this post